Infinity user !!!!

[patoche]

Hi

I get a problem with an Infinity harder and steinbeck airbrush.
In fact , i don't know if it's a problem or not , because it's the first time i use it.
The air flow on the airbrush exit is very low , even if i put 30 or 40 psi on the compressor . I've done a full clean up of every parts , but nothing change !
I've tried it without cap and nozzle and the air flow seems to be OK.
I don't understand anything , what can be wrong with my needle and nozzle , is there any relationship betwenn nozzle and air flow???
Did someone has already get this kind of problem with Infinity or with another airbrush .
Really don't know what to do .

Thanks

pat

[incognito]

I don't have the same ab, but I had the same thing happen a few days ago with one of mine. The pressure cranked up, and a feeble little bit of air coming out. I had cleaned it, but in fact that was what it was, a tiny bit of gunge in the nozzle, it really was hard to see, and I couldn't believe it would be able to affect the airflow so much, but it did. After a thorough clean, it was fine after that, maybe it is the same with your infinity,

[don johnson]

Pat
I always had to crank the pressure way up on that airbrush to get it to work.
Try the other needle and nozzle that was with that brush see what happens.

[patoche]

Well , it seems to be normal, i've tried other needle and noozle 0.15 and 0.2 and it's the same. It's better with 0.4 !
Stange , it's not like this on the Evolution and all pieces are the same .
Thanks
pat

[brushbyair]

Pat, my 2 in 1 works the same way, I think it is built into the gun that way. I kinda like it, after you use it awhile I think you might like it too.

[patoche]

Thanks

I like it but was a little bit surprised by the low pressure and wanted to be sure that it is normal.
It's not a problem for me because i always thin a lot all the paints, but even HOK has to be thin a lot to get a nice flow in the infinity!

thanks

pat

[yardartnut]

Mine too pat we talked about that at the end of one my post the other day..
http://www.airbrushtechnique.com/for...-peek-wip.html

[Doggy]

ive got a infinity and im having no problems...work great...it's one of my favorits