home mad AB stand

[Sascha]

so this morning I was bored and in the past couple of days, I have been playing around with the idea of building an airbrush stand. I did a search to find out what people made themselves, but I wanted something a little more fun, so I picked a few pieces of scrap mahogany I had in my shop( i am a hobby woodworker) from a past project and started building.
it had to accommodate at least 9 guns, 4 bottom feed, 4 gravity feed and my small touch up gun.one of my brushes is the CM-Cplus with the MAC valve so I had to cut and extra slot into the holder to accommodate the valve.
it also had to have room for my manifold(i know the hoses are a mess, but I am lazy) and also for some paint and cleaner.
I finished this project in about 8 hours and at night, I sprayed it with 3 coats of lacquer to protect it. so here we go










here is the link to the rest of the pictures of my studio setup/formal dining room

http://www.pbase.com/saschagast/airbrushing

thanx for looking guys, let me know what you think

[stormer]

I think that is supercool! All guns, the paint you use, some other things you need right in front of you. Top job there!

Niclas

[aixguy]

very nice work, I wish you the best of luck! For me, I would have all those hoses looking like a bowl of spaghetti within about 14 seconds...can't even use 2 brushes hooked up at once..
You may want to place that stand on a piece of carpet, just incase one of those brushes trys to make a break for it..

[gixster92]

outstanding job on this... I wish I had your wood working skills... amazing.

[Gators]

Really nice Sascha, I can see something like this in my future.
Your pics are great and it is evident that you put more than a couple of minutes of thought into this project.

Thanks for the post.

[Diaz Dezine]

I'd have to say that is BADASS!!!
Great work!!
DIAZ

[rowie]

HOLY SPLINTERS BATMAN!

That is brilliant! I'd need to sell more stuff to make room though!

[Sascha]

Originally Posted by aixguy

very nice work, I wish you the best of luck! For me, I would have all those hoses looking like a bowl of spaghetti within about 14 seconds...can't even use 2 brushes hooked up at once..
You may want to place that stand on a piece of carpet, just incase one of those brushes trys to make a break for it..

thanx aixguy, i am still testing it out. if it's too crazy, i just remove a few hoses.
and those guns are solid in there, they slide all the way in the holder but i was thinking that I could even reinforce everything with rare earth magnets

[Sascha]

thank you guys, thanx much.

I am a self taught woodworker, though it's not always easy, I was able to learn it pretty fast, but airbrushing is a total different animal. I will need a few years to get there

[TimelessBarbara]

WOW!

Ok, I can give you directions to my house, I'll take that fabO setup in the corner, please

Great job!