Quote:
Originally Posted by kant76
very good, is it some keind of see throug on the wisor?
|
Yes.
There is a lot of different mesh like product that you can buy for the visor of the helmet. My favorite is just going to the store and buying the kind that people use for the back windows of their trucks.
1. Take off the visor.
2. Wrap a piece of suran wrap around it nice and tight, to protect it.
3. Roll out enough of the mesh to cover it and cut off your piece.
4. Place little rolls of tape on the back or spray it with spray addhesive.
5. Start folding it over the visor nice and tightly .
6. On the back side cut off the excess leaving about 1/3 of an inch. So you have some thing to fold over when it is all done.
7. Prep the suface with 600-800 sandpaper(dry).
8. Mask off the open area on the helmet. Use little rolls of tape to put the visor in its spot on the helmet.
9. Spray some Prep all on a clean cloth and wipe off all your fingerprints. wait 5 minutes.
10. Wipe off again with a clean dry cloth and again with a tack rag.
Now it is ready to paint.