[fresnojohns]

As alot of you know, I do alot of panels and give them out to
stay in practice. This panel is foam core. You can buy it in 22 by 28 inch
sheets at Art Supply stores. This is how I did it.
1.Get sheet and measure with square and cut in half..
2.Get desired sheet size and spray rattle can acrylic or anything that dries
fast and can be recoated with no problem.
3.Break out airbrush and do background in clouds or whatever you like.
4.Get Createx or Auto Air opaque and with a synthetic liner any brand you like
do your scrolls. Cool thing when over clear you can wipe it off if you make an error.
5.When dry clear it and seal designs
You can also use a Mack series 70 striper for water base and do dagger
style designs to. Using water based stuff is not new even for this. Many
ShowCard Signs are done in water base too.
Always keep water, oil, and poly type brushes seperate.
Fresnojohns