AIRBRUSH TECHNIQUE - LEARN TO AIRBRUSH - View Single Post - createx paints-too old

gtech · 01-02-2006

When I began using Createx paint, I used 10% of water max when I was working on paper, and was using Liquitex medium when I wanted to dilute more.

But at the end, I was using only Liquitex medium, and sometimes a bit of water if it was not diluted enough and needed just a bit more.

I have to admit I had to dilute the Createx paint to get good results when I was working on paper because of the lower pressure (20-25 psi) I was using. Undiluted, it was a paint to use.

I was working ok undiluted for t-shirts because of the higher pressure I was using for t-shirts (50-65 psi).

About Future Wax: http://www.swannysmodels.com/TheCompleteFuture.html

Gilles

01-02-2006	#3 (permalink)
gtech SENIOR MEMBER Join Date: Dec 2004 Posts: 357	Re: createx paints-too old When I began using Createx paint, I used 10% of water max when I was working on paper, and was using Liquitex medium when I wanted to dilute more. But at the end, I was using only Liquitex medium, and sometimes a bit of water if it was not diluted enough and needed just a bit more. I have to admit I had to dilute the Createx paint to get good results when I was working on paper because of the lower pressure (20-25 psi) I was using. Undiluted, it was a paint to use. I was working ok undiluted for t-shirts because of the higher pressure I was using for t-shirts (50-65 psi). About Future Wax: http://www.swannysmodels.com/TheCompleteFuture.html Gilles Last edited by gtech; 01-02-2006 at 09:49 PM.