Re: fine line
Welcome to the board and the world of ABing 1woo, I do not believe your brush is designed to spray with the tip off, I have a 155 Anthem and it will not. Some artist will take the tip off to get finer details. It allows them to get closer to the surface at lower psi and see better at were they are "aiming" so to say. For an inexperienced ABer, I wouldn't suggest it until you can control the gun because you can easily bend the needle by bumping the surface you are painting. Not only that, you'll end up misplacing that tip that is there to protect from just that thing.
Some will also take it off to fight what you are or will experience, that's "tip dry". Do a search on this at the top of the page and see all the results you get. Createx is bad for this, paints flowing smooth......sputters......then stops..............sprays. People will leave the cap off so they can constantly clean the dried paint from the tip of the needle.
As for the PSI, you will have to play with the paint mixture/ reduction to get it to flow smoothly. 20 psi is low for straight out of the bottle Createx though.
It all boils down to this, your AB is fine for the fine details but you will have to do allot of practice and playing with proper mixing to get the results you want. Have fun............................................... .....Kwit
|