Quote:
Originally Posted by fontgeek
Wayne, there is a small clip ring in the bottom end of the airvalve, it is kind of like the letter "C" with a small hole at both ends. With small tweezers or a specialized tool, you put the points of the tool or tweezers in the two holes, then squeeze them together and pull them towards you. By contracting the two ends of the "C", you reduce the diameter, which in turn lets you pull them from the groove they normally sit in. Once you have pulled that out, you can remove the rest of the pieces. You can download the exploded drawings from Iwata's website for your particular brush. This will tell you all the pieces you should be seeing or looking for, and it will also give you a guide for reassembling your airvalve.
Good luck, let me know if there is anything I can do to help.
|
Thanks fontgeek, all taken care of. I posted the out come in ''general discussion'' it actualy feel out tuesday nite after I decided to ream it with a drill bit. I know.. but desperate and figured I had nothing to loose. It was after I got the drill out,that it just feel out while lightly honing it. Today I spent over a hundred bucks and bought all sorts of new parts for my BCS and my badger 150. Needles, heads, vavles for both. Lil' pricey but had to do it. Thursday I start my Faux chrome project, reproducing car emblems on total restoration. 1967 barracuda, weeded what I needed for tomorrow and put my brushes back together. little anxious to get this started, been in the works way to long and jus' want to get it done. I feel confidant to make final result look good ,having a lil' hard time on a couple of the emblems as far as what order to tackle it... (multi steps.) Had masks cut and recut.Guy has alot of cash into it so far and all I've painted is the double stripes down the sides. He loved 'em. Hey one thing ..I'm not to sure about how to escape these threads or stop them , not even sure what protocol is . Don't want people tired of reading ,em,know what I mean? Or maybe it's not a big deal. But thanks for your concern this has been kinda addicting checking for replies. For now all is cool.Maybe I'll get some photos up when I'm done. Callin it a day, thanks again. Wayne